There are generally three cleaning methods for PP filter cartridges:
1. Clean with household cleaning solution or detergent
Mix the cleaner's detergent and water in a water basin, then put the PP cotton into it. Rub the darker areas on the outside of the PP filter element by hand until the color becomes lighter. Then rinse it under the faucet, and when the filter element becomes lighter, bring another basin of water and add some detergent to continue cleaning. This can clean the impurities inside the filter element together, ensuring that the cleaning effect of the filter element is not affected after cleaning.
2. Use industrial cleaning agents for cleaning
According to user needs, many businesses have also produced professional cleaning agents for industrial products. These cleaning agents have a very strong washing effect and are very beneficial for the secondary use of PP filters. However, the cost of industrial cleaning agents is higher than that of household use, and they are generally only suitable for cleaning large quantities of industrial products. Household water purifiers are generally not recommended for this method, but if you have a special channel, that's a different story.
Is the cleaning of PP filter element particularly simple! I hope everyone is not afraid of trouble. Pay attention to the use of the water purifier in a timely manner, and discover whether the filter element of the water purifier needs to be cleaned or replaced in a timely manner. Only by cleaning or replacing it in a timely manner can the water purifier better play its role and extend its service life.
3. Clean directly with clean water
There are two steps to directly clean with clean water. Firstly, remove the PP filter element from the water purifier and place it in a basin of clean water. Grasp the filter element and vigorously swing it. When the water becomes turbid, replace it with another basin of clean water and continue cleaning until the color of the filter element becomes lighter. The second step is to place the filter element under the faucet, turn on the faucet for flushing, and deeply purify some parts that have not been cleaned until water can flow out directly from the filter element. This cleaning mode is the simplest and most cost-effective method. Hua Mukun recommends everyone to use this method.
